TRAINING ONLINE ELECTRICAL MAINTENANCE LOW AND MEDIUM VOLTAGE

TRAINING WEBINAR PERAWATAN KELISTRIKAN

TRAINING PERAWATAN KELISTRIKAN TEGANGAN RENDAH UNTUK PRAKERJA

Electrical Maintenance Low and Medium Voltage Training Description pelatihan perawatan kelistrikan online

   The backbone of many electric power systems is the medium voltage
    distribution system. Typically operating at voltages ranging from
    2,400 to 34,500 Volts, voltage stress, corona, surges and protection
    of equipment all create unique challenges in design, equipment
    selection, operation and engineering. This 2 day class takes you
    through   the   basics of medium voltage power systems including
    components,equipment,   design and operation problems as well as
    protection of medium voltage systems.

Electrical Maintenance Low and Medium Voltage Training Purpose pelatihan perawatan kelistrikan tegangan rendah online

   Setelah selesai mengikuti kursus Electrical Maintenance Low and Medium
    Voltage ini, peserta diharapkan akan mengerti dan memahami masalah
    Audit sampai pada penerapan konsep Power Management System. Dimana hal
    itu diperlukan oleh perusahaan sebagai suatu komponen pendukung
    kegiatan produksi untuk menjamin ketersediaan energi listrik dengan
    efisien dan murah.

Electrical Maintenance Low and Medium Voltage Training Outline pelatihan perawatan kelistrikan tegangan tinggi online

   MEDIUM VOLTAGE SAFETY
      * Electrocution at Low vs. Medium Voltage, Arc Flash,
      * Qualified Person, Approach Boundaries

   TYPES OF MEDIUM VOLTAGE SYSTEMS
      * Utility and Industrial One lines, Reliability Requirements,
      * Overhead and Underground Systems, Regulated Systems

   MEDIUM VOLTAGE CABLE
      * Copper vs. Aluminum Design, Voltage Ratings
      * Insulation Ratings, 100%, 133%, 173% Insulation Levels,
      * Shielding Requirements, Electric Fields, Terminating MV
      * Conductors, Orientation of Overhead Lines

   MEDIUM VOLTAGE SUBSTATION TRANSFORMERS
      * Core and Coil Design, Aluminum and Copper Windings
      * Tank Construction, Loss Evaluation, Efficiency, Regulation

   SPOT NETWORKS
      * Spot Network Design, Network Protectors, Network Protector
      * Relay Operation, Directional Protection Requirements

   PARTIAL DISCHARGE
      * Corona, Surface Tracking, Voltage Stress, Sensing Partial
      * Discharge, Component Failure

   GROUNDING MEDIUM VOLTAGE SYSTEMS
      * Resistance Grounding, Solid Grounding, Ungrounded Delta
      * Charging Current, Effect of Ground Faults on Delta Voltage

   SURGE PROTECTION
      * Lightning and Switching Surges, Classes of Surge Arresters
      * MCOV Ratings – (Maximum Continuous Operating Voltage)
      * TOV – (Maximum Temporary Over Voltage Capability),
      * Protective Characteristics, Surge Arrester Selection, Energy
      * Capability, Effect of Grounding on Arrestor Selection,
      * Insulation Coordination,

   CURRENT TRANSFORMER APPLICATIONS
      * Ratings, Selection Process, Accuracy, Saturation, Excitation
      * Curves, Burden Calculation, Momentary Ratings

   MEDIUM VOLTAGE CIRCUIT BREAKERS
      * Vacuum, Air, Oil, SF6 Designs, Symmetrical Interrupting
      * Rating, K-Rated Voltage Factor, Close and Latch Capability

   RECLOSERS
      * Application on Feeder Circuits, Recloser Settings
      * Continuous Current and Interrupting Ratings

   MEDIUM VOLTAGE FUSES
      * Medium Voltage Switches, Load Rating, Close and Latch
      * Rating, Short Time Rating, Expulsion vs. Current Limiting
      * Fuse Characteristics, E and R Rated Fuses, Fuse Cutouts

   MEDIUM VOLTAGE PROTECTION CONCEPTS
      * Medium Voltage Protection, Relays, Circuit Breakers, R and
      * E rated Fuses, Short Circuit vs. Overcurrent Protection

   DISTRIBUTION FEEDER PROTECTION
      * Protection with Fuses – 300%, Overcurrent Protection with
      * Relays – 600%, Short Circuit Damage Characteristics, Relay
      * “Reach” for End of Line Faults

   ROTATING MACHINERY PROTECTION
      * Requirements, Decrement Curves, Thermal Damage Curves,
      * Reactive, Capability Curves, Differential Protection

   MEDIUM VOLTAGE MOTOR CONTROLLERS
      * Protection Requirements, Motor Management Relays, Circuit
      * Breaker Protection, Relaying, Class R Rated Fuses

   TRANSFORMER PROTECTION
      * ANSI C57 Thru Fault Curves, Impact of Transformer Winding
      * Configuration, Overview of Differential Protection, Inrush and
      * Harmonic Restraint

    Electrical Maintenance Low and Medium Voltage Training Audience
      * D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau
        setara.
      * Teknisi, Operator dan Supervisor didalam bidang instrumentasi,
        maintenance dan operasional.
      * Mereka yang dalam tugasnya berhubungan dan atau terkait dengan
        materi kursus.

Electrical Maintenance Low and Medium Voltage Training Methods

Presentasi, diskusi, dan studi kasus

Electrical Maintenance Low and Medium Voltage

Trainer : Bapak Arief Adinoto, S.E dan Tim

Jadwal pelatihan :

Batch 1 : 20 – 21 Januari 2026

Batch 2 : 10 – 11 Februari 2026

Batch 3 : 3 – 4 Maret 2026

Batch 4 : 14 – 15 April 2026

batch 5 : 19 – 20 Mei 2026

batch 6 : 24 – 25 Juni 2026

batch 7 : 8 – 9 Juli 2026